Enhance Your Lighting with LED Retrofit Kits

Welcome to our LED Retrofit Kits collection, where lighting innovation meets practicality. Our range of LED Retrofit Kits offers the perfect solution for modernizing your lighting setup without breaking the bank. Explore our selection of 2×4 LED Retrofit Kits, magnetic options, and 4ft variations to find the ideal fit for your needs. In this guide, we’ll highlight why our products stand out, showcase key features, provide a quick installation overview, and address common queries to ensure a seamless upgrade experience.

820 Series Magnetic Strip LED Retrofit KitS

Why Choose DVDLights' LED Retrofit Kits?

Unmatched Quality

Our LED Retrofit Kits are made from high-quality materials ensuring durability and longevity. Each kit undergoes rigorous testing to meet industry standards and exceed customer expectations.

Energy Efficiency

Switching to our LED Retrofit Kits can reduce your energy consumption by up to 70%. This means lower electricity bills and a reduced carbon footprint.

Easy Installation

Our retrofit kits are designed for hassle-free installation. With clear instructions and all necessary components included, you can upgrade your lighting system in no time.

Customer Support

We pride ourselves on exceptional customer service. Our team is always ready to assist you with any questions or concerns you might have about our products.

Product Features

  • High Lumen Output: Brighten up any space with our powerful LED lights. Our retrofit kits deliver a superior level of brightness, ensuring that every corner of your space is well-lit and vibrant. Ideal for commercial, industrial, and residential settings, our LED lights create a safer and more productive environment.

  • Energy Saving: Save on energy costs with our efficient LED technology. Our retrofit kits are designed to use significantly less energy than traditional lighting solutions, reducing your electricity bills and lowering your overall energy consumption. By upgrading to LED, you also contribute to environmental sustainability.

  • Long Lifespan: Our LEDs have a lifespan of over 50,000 hours. This means you can enjoy years of maintenance-free lighting, reducing the hassle and cost of frequent replacements. Our robust design ensures consistent performance and reliability throughout the lifespan of the product.

  • Easy Installation: Quick and simple setup process. Our retrofit kits come with detailed instructions and all the necessary components, making the installation process straightforward and stress-free. Whether you’re a professional installer or a DIY enthusiast, you’ll find our kits easy to work with.

Quick Step-by-Step Installation Guide

1. Preparation

  • Turn Off the Power: Ensure the power supply to the lighting fixture is turned off at the circuit breaker to avoid any electrical hazards.
  • Remove Existing Fixture: Carefully remove the existing fixture, including any bulbs, ballasts, and old components. Make sure to wear safety gloves and eye protection during this process.
  • Check Compatibility: Verify that your retrofit kit is compatible with the existing fixture. Measure the fixture dimensions and compare them with the kit specifications to ensure a proper fit.

2. Installation of the Retrofit Kit

  • 2×4 LED Retrofit Kit:

    • Position the Kit: Place the retrofit kit into the fixture housing, ensuring it is aligned correctly.
    • Secure the Kit: Use the provided screws and brackets to secure the retrofit kit firmly in place. Ensure all parts are tightly fastened to prevent any movement or vibration.
  • Magnetic LED Retrofit Kit:

    • Attach Magnetic Strips: Clean the metal surface of the fixture to remove any dust or debris. Attach the magnetic strips on the back of the LED panel to the metal surface of the fixture. Ensure proper alignment for optimal light distribution.
    • Double-Check Alignment: Verify that the LED panel is securely attached and aligned correctly. Adjust if necessary to ensure even lighting.
  • 4ft LED Retrofit Kit:

    • Install LED Tubes: Slide the LED tubes into the fixture, aligning them with the existing sockets or mounting brackets.
    • Secure with Clips: Use the provided clips or brackets to secure the LED tubes in place. Make sure the tubes are stable and will not move once the power is turned back on.

3. Wiring

  • Connect the Driver: Locate the LED driver included in the retrofit kit. Connect the driver to the power source according to the wiring diagram provided in the kit. Ensure all connections are tight and secure.
  • Insulate Connections: Use wire nuts or electrical tape to insulate any exposed wires, preventing electrical shorts or hazards.
  • Check for Secure Connections: Double-check all wiring connections to ensure they are secure and properly insulated.

4. Testing

  • Restore Power: Turn the power back on at the circuit breaker.
  • Test the System: Switch on the new LED lighting system to test its functionality. Check for consistent brightness and proper operation. If any issues arise, turn off the power and recheck the installation steps.
  • Adjust if Needed: If the lighting is uneven or not functioning correctly, make necessary adjustments to the alignment and connections.

5. Final Adjustments

  • Positioning: Make any final adjustments to the positioning and alignment of the LED lights to ensure even light distribution.
  • Clean Up: Clean the installation area, removing any debris or old components. Dispose of old fixtures responsibly according to local regulations.
  • Final Inspection: Conduct a final inspection to ensure everything is installed correctly and securely. Make sure there are no loose parts or exposed wires.

Frequently Asked Questions (FAQs)

What is a LED Retrofit Kit?

A LED Retrofit Kit is a set of components that allow you to upgrade your existing lighting fixtures to LED technology without replacing the entire fixture.

How do I choose the right retrofit kit for my needs?

Consider the size and type of your existing fixtures. For example, a 2×4 LED retrofit kit is ideal for standard 2×4 fixtures, while a magnetic LED retrofit kit is perfect for metal surfaces where traditional screws and brackets might not work.

How long does the installation take?

The installation process is straightforward and typically takes about 30 minutes to an hour, depending on the type of kit and the number of fixtures being retrofitted.

Are LED Retrofit Kits compatible with dimmer switches?

Yes, many of our LED Retrofit Kits are compatible with dimmer switches. Please check the product specifications to ensure compatibility.

What is the lifespan of your LED Retrofit Kits?

Our LED Retrofit Kits have a lifespan of over 50,000 hours, providing years of maintenance-free lighting.


CLICK TO CALL 1-800-8385070
Scroll to Top
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.